97 lines
2.4 KiB
C
97 lines
2.4 KiB
C
// Copyright 2021 IOsetting <iosetting(at)outlook.com>
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
//
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
/***
|
|
* Demo: ZS-042, DS3231 I2C RTC/TCXO/Crystal
|
|
* Board: STC8H3K32
|
|
*
|
|
* P32 -> SCL
|
|
* P33 -> SDA
|
|
* GND -> GND
|
|
* 3.3V -> VCC
|
|
*/
|
|
|
|
#include "fw_hal.h"
|
|
#include "ds3231.h"
|
|
|
|
__XDATA uint8_t time[9];
|
|
|
|
void I2C_Init(void)
|
|
{
|
|
// Master mode
|
|
I2C_SetWorkMode(I2C_WorkMode_Master);
|
|
/**
|
|
* I2C clock = FOSC / 2 / (__prescaler__ * 2 + 4)
|
|
*/
|
|
I2C_SetClockPrescaler(0x3F);
|
|
// Switch alternative port
|
|
I2C_SetPort(I2C_AlterPort_P32_P33);
|
|
// Start I2C
|
|
I2C_SetEnabled(HAL_State_ON);
|
|
}
|
|
|
|
void GPIO_Init(void)
|
|
{
|
|
// SDA
|
|
GPIO_P3_SetMode(GPIO_Pin_3, GPIO_Mode_InOut_QBD);
|
|
// SCL
|
|
GPIO_P3_SetMode(GPIO_Pin_2, GPIO_Mode_Output_PP);
|
|
}
|
|
|
|
int main(void)
|
|
{
|
|
SYS_SetClock();
|
|
// UART1 configuration: baud 115200 with Timer2, 1T mode, no interrupt
|
|
UART1_Config8bitUart(UART1_BaudSource_Timer2, HAL_State_ON, 115200);
|
|
|
|
GPIO_Init();
|
|
I2C_Init();
|
|
time[0] = DS3231_GetStatus();
|
|
UART1_TxString("Status:");
|
|
UART1_TxHex(time[0]);
|
|
UART1_TxString("\r\n");
|
|
// Set time
|
|
time[7] = DS3231_FORMAT_24H;
|
|
time[0] = 2022 - 1990; // year
|
|
time[1] = 7; // month
|
|
time[2] = 7; // week day
|
|
time[3] = 10; // date
|
|
time[4] = 14; // hour
|
|
time[5] = 21; // minute
|
|
time[6] = 10; // second
|
|
DS3231_SetTime(time);
|
|
|
|
while(1)
|
|
{
|
|
DS3231_GetTime(time);
|
|
UART1_TxHex(time[0]);
|
|
UART1_TxChar('-');
|
|
UART1_TxHex(time[1]);
|
|
UART1_TxChar('-');
|
|
UART1_TxHex(time[3]);
|
|
UART1_TxChar(' ');
|
|
UART1_TxHex(time[4]);
|
|
UART1_TxChar(':');
|
|
UART1_TxHex(time[5]);
|
|
UART1_TxChar(':');
|
|
UART1_TxHex(time[6]);
|
|
UART1_TxChar(' ');
|
|
UART1_TxHex(time[7]);
|
|
UART1_TxChar(' ');
|
|
UART1_TxHex(time[8]);
|
|
UART1_TxString("\r\n");
|
|
SYS_Delay(1000);
|
|
}
|
|
}
|