117 lines
5.0 KiB
C
117 lines
5.0 KiB
C
#ifndef ___FW_TIM_H___
|
|
#define ___FW_TIM_H___
|
|
|
|
#include "fw_conf.h"
|
|
#include "fw_types.h"
|
|
#include "fw_exti.h"
|
|
|
|
typedef enum
|
|
{
|
|
TIM_TimerMode_16BitAuto = 0x00, // 16-bit auto-reload from [TH0,TL0](Timer0), [TH1,TL1](Timer1)
|
|
TIM_TimerMode_16Bit = 0x01, // 16-bit no-auto-reload
|
|
TIM_TimerMode_8BitAuto = 0x02, // 8-bit auto-reload from TH0(Timer0), TH1(Timer1)
|
|
TIM_TimerMode_16BitAutoNoInt = 0x03 // Uninterruptable 16-bit auto-reload, Timer0 only
|
|
} TIM_TimerMode_t;
|
|
|
|
|
|
/***************************** /
|
|
* Timer 0
|
|
*/
|
|
#define TIM_Timer0_SetRunState(__STATE__) SBIT_ASSIGN(TR0, __STATE__)
|
|
#define TIM_Timer0_SetGateState(__STATE__) SFR_ASSIGN(TMOD, 3, __STATE__)
|
|
#define TIM_Timer0_SetFuncCounter SFR_SET(TMOD, 2)
|
|
#define TIM_Timer0_SetFuncTimer SFR_RESET(TMOD, 2)
|
|
// ON:FOSC, OFF:FOSC/12
|
|
#define TIM_Timer0_Set1TMode(__STATE__) SFR_ASSIGN(AUXR, 7, __STATE__)
|
|
// Enable output on P3.5, when counter overflow, P3.5 switch voltage level
|
|
#define TIM_Timer0_SetOutput(__STATE__) SFR_ASSIGN(INTCLKO, 0, __STATE__)
|
|
#define TIM_Timer0_SetMode(__TIM_TIMER_MODE__) (TMOD = TMOD & ~(0x03 << 0) | ((__TIM_TIMER_MODE__) << 0))
|
|
#define TIM_Timer0_SetInitValue(__TH__, __TL__) do{ TH0 = (__TH__); TL0 = (__TL__); }while(0)
|
|
|
|
void TIM_Timer0_Config(
|
|
HAL_State_t freq1t,
|
|
TIM_TimerMode_t mode,
|
|
uint16_t frequency,
|
|
HAL_State_t intState,
|
|
EXTI_IntPriority_t intPriority);
|
|
|
|
|
|
/***************************** /
|
|
* Timer 1
|
|
*/
|
|
#define TIM_Timer1_SetRunState(__STATE__) SBIT_ASSIGN(TR1, __STATE__)
|
|
#define TIM_Timer1_SetGateState(__STATE__) SFR_ASSIGN(TMOD, 7, __STATE__)
|
|
#define TIM_Timer1_FuncCounter SFR_SET(TMOD, 6)
|
|
#define TIM_Timer1_FuncTimer SFR_RESET(TMOD, 6)
|
|
// ON:FOSC, OFF:FOSC/12
|
|
#define TIM_Timer1_Set1TMode(__STATE__) SFR_ASSIGN(AUXR, 6, __STATE__)
|
|
// Enable output on P3.4, when counter overflow, P3.4 switch voltage level
|
|
#define TIM_Timer1_SetOutput(__STATE__) SFR_ASSIGN(INTCLKO, 1, __STATE__)
|
|
#define TIM_Timer1_SetMode(__TIM_TIMER_MODE__) (TMOD = TMOD & ~(0x03 << 4) | ((__TIM_TIMER_MODE__) << 4))
|
|
#define TIM_Timer1_SetInitValue(__TH__, __TL__) do{ TH1 = (__TH__); TL1 = (__TL__); }while(0)
|
|
|
|
void TIM_Timer1_Config(
|
|
HAL_State_t freq1t,
|
|
TIM_TimerMode_t mode,
|
|
uint16_t frequency,
|
|
HAL_State_t intState,
|
|
EXTI_IntPriority_t intPriority);
|
|
|
|
|
|
/***************************** /
|
|
* Timer 2,3,4 (STC8H3K only)
|
|
*
|
|
* ||=> 12T Mode => |
|
|
* | | |Counter| |=> TxIF Interrupt
|
|
* SYSCLK => TMxPS => | |=> |Timer | => TxR => TxH|TxL =>|
|
|
* | | |=> TxCLKO => Output
|
|
* ||=> 1T Mode => |
|
|
*/
|
|
#define TIM_Timer2_SetRunState(__STATE__) SFR_ASSIGN(AUXR, 4, __STATE__)
|
|
#define TIM_Timer2_FuncCounter SFR_SET(AUXR, 3)
|
|
#define TIM_Timer2_FuncTimer SFR_RESET(AUXR, 3)
|
|
// ON:FOSC, OFF:FOSC/12
|
|
#define TIM_Timer2_Set1TMode(__STATE__) SFR_ASSIGN(AUXR, 2, __STATE__)
|
|
// Enable output on P1.3, when counter overflow, P1.3 switch voltage level
|
|
#define TIM_Timer2_SetOutput(__STATE__) SFR_ASSIGN(INTCLKO, 2, __STATE__)
|
|
#define TIM_Timer2_SetInitValue(__TH__, __TL__) do{ T2H = (__TH__); T2L = (__TL__); }while(0)
|
|
// Timer2 Prescaler: [0, 255]
|
|
#define TIM_Timer2_SetPreScaler(__PRE__) do{P_SW2 = 0x80; TM2PS = (__PRE__); P_SW2 = 0x00;}while(0)
|
|
|
|
void TIM_Timer2_Config(HAL_State_t freq1t, uint8_t prescaler, uint16_t frequency, HAL_State_t intState);
|
|
|
|
|
|
/***************************** /
|
|
* Timer 3
|
|
*/
|
|
#define TIM_Timer3_SetRunState(__STATE__) SFR_ASSIGN(T4T3M, 3, __STATE__)
|
|
#define TIM_Timer3_FuncCounter SFR_SET(T4T3M, 2)
|
|
#define TIM_Timer3_FuncTimer SFR_RESET(T4T3M, 2)
|
|
// ON:FOSC, OFF:FOSC/12
|
|
#define TIM_Timer3_Set1TMode(__STATE__) SFR_ASSIGN(T4T3M, 1, __STATE__)
|
|
// Enable output on P0.4
|
|
#define TIM_Timer3_SetOutput(__STATE__) SFR_ASSIGN(T4T3M, 0, __STATE__)
|
|
#define TIM_Timer3_SetInitValue(__TH__, __TL__) do{ T3H = (__TH__); T3L = (__TL__); }while(0)
|
|
// Timer3 Prescaler: [0, 255]
|
|
#define TIM_Timer3_SetPreScaler(__PRE__) do{P_SW2 = 0x80; TM3PS = (__PRE__); P_SW2 = 0x00;}while(0)
|
|
|
|
void TIM_Timer3_Config(HAL_State_t freq1t, uint8_t prescaler, uint16_t frequency, HAL_State_t intState);
|
|
|
|
/***************************** /
|
|
* Timer 4
|
|
*/
|
|
#define TIM_Timer4_SetRunState(__STATE__) SFR_ASSIGN(T4T3M, 7, __STATE__)
|
|
#define TIM_Timer4_FuncCounter SFR_SET(T4T3M, 6)
|
|
#define TIM_Timer4_FuncTimer SFR_RESET(T4T3M, 6)
|
|
// ON:FOSC, OFF:FOSC/12
|
|
#define TIM_Timer4_Set1TMode(__STATE__) SFR_ASSIGN(T4T3M, 5, __STATE__)
|
|
// Enable output on P0.7
|
|
#define TIM_Timer4_SetOutput(__STATE__) SFR_ASSIGN(T4T3M, 4, __STATE__)
|
|
#define TIM_Timer4_SetInitValue(__TH__, __TL__) do{ T4H = (__TH__); T4L = (__TL__); }while(0)
|
|
// Timer4 Prescaler: [0, 255]
|
|
#define TIM_Timer4_SetPreScaler(__PRE__) do{P_SW2 = 0x80; TM4PS = (__PRE__); P_SW2 = 0x00;}while(0)
|
|
|
|
void TIM_Timer4_Config(HAL_State_t freq1t, uint8_t prescaler, uint16_t frequency, HAL_State_t intState);
|
|
|
|
|
|
#endif |