// Copyright 2021 IOsetting <iosetting(at)outlook.com>
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

/***
 * Demo:  DS18B20
 * Board: STC8H3K32
 * 
 *              P35   -> DQ
 *              GND   -> GND
 *              3.3V  -> VCC
 */

#include "fw_hal.h"
#include "ds18b20.h"

uint16_t temp;

int main(void)
{
    uint16_t temperature;

    SYS_SetClock();
    // UART1, baud 115200, baud source Timer1, 1T mode, no interrupt
    UART1_Config8bitUart(UART1_BaudSource_Timer1, HAL_State_ON, 115200);
    DS18B20_Init();

    while(1)
    {
        DS18B20_StartAll();
        while (!DS18B20_AllDone())
        {
            UART1_TxChar('.');
            SYS_Delay(1);
        }
        temperature = DS18B20_ReadTemperature();
        UART1_TxHex(temperature >> 8);
        UART1_TxHex(temperature & 0xFF);
        UART1_TxString("\r\n");
        SYS_Delay(1000);
    }
}