// Copyright 2021 IOsetting // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. /** * USB Keyboard Demo * * P0: 8 bits for 4x4 Key matrix * P6.0: NumLock * P6.1: CapsLock */ #include "fw_hal.h" #include #define KeyIO P0 __BIT B_1ms; // 1ms flag __BIT KeyChangeTemp; __BIT KeyChangeFlag; uint16_t cnt50ms; uint16_t KeyCode; // code of key pressed uint16_t OldKeyCode; // for key status changing check uint16_t NewKeyCode; // new key status uint16_t KeyHoldTime; __CODE uint8_t DEVICEDESC[18]; __CODE uint8_t CONFIGDESC[41]; __CODE uint8_t HIDREPORTDESC[63]; __CODE uint8_t LANGIDDESC[4]; __CODE uint8_t MANUFACTDESC[8]; __CODE uint8_t PRODUCTDESC[30]; __CODE uint8_t KeyMap[16]; __XDATA uint8_t HidFreature[64]; __XDATA uint8_t HidInput[64]; __XDATA uint8_t HidOutput[64]; usb_request_t usb_request; USB_EP0_Stage_t USB_EP0_Stage; void USB_Init(void); void KeyScan(void); void SendKeyStatus(void); void main() { uint8_t i; GPIO_P1_SetMode(GPIO_Pin_All, GPIO_Mode_InOut_QBD); GPIO_P3_SetMode(GPIO_Pin_0 | GPIO_Pin_1, GPIO_Mode_Input_HIP); GPIO_P6_SetMode(GPIO_Pin_All, GPIO_Mode_Output_PP); USB_Init(); TIM_Timer0_Config(HAL_State_ON, TIM_TimerMode_16BitAuto, 1000); EXTI_Timer0_SetIntState(HAL_State_ON); EXTI_Timer0_SetIntPriority(EXTI_IntPriority_High); TIM_Timer0_SetRunState(HAL_State_ON); EXTI_Global_SetIntState(HAL_State_ON); for (i = 0; i < 8; i++) { HidInput[i] = 0; } while (1) { if (B_1ms) // every 1 ms { B_1ms = 0; if (++cnt50ms >= 50) // scan every 50 ms { cnt50ms = 0; KeyScan(); } if (KeyChangeFlag) // if key status changed { KeyChangeFlag = 0; SendKeyStatus(); } } } } void USB_Init() { SYS_EnableOscillator48M(); USB_SetClockSource(USB_ClockSource_6M); USB_SetEnabled(HAL_State_ON); USB_SetDpDmPullUp(HAL_State_ON); EXTI_USB_SetIntPriority(EXTI_IntPriority_Highest); USB_WriteReg(FADDR, 0x00); USB_WriteReg(POWER, 0x08); USB_WriteReg(INTRIN1E, 0x3f); USB_WriteReg(INTROUT1E, 0x3f); USB_WriteReg(INTRUSBE, 0x00); USB_WriteReg(POWER, 0x01); USB_EP0_Stage.bStage = USB_CtrlState_Idle; EXTI_USB_SetIntState(HAL_State_ON); } INTERRUPT(USB_Routine, EXTI_VectUSB) { uint8_t intrusb; uint8_t intrin; uint8_t introut; uint8_t csr; uint8_t cnt; uint16_t len = 0; intrusb = USB_ReadReg(INTRUSB); intrin = USB_ReadReg(INTRIN1); introut = USB_ReadReg(INTROUT1); if (intrusb & RSTIF) { USB_WriteReg(INDEX, 1); USB_WriteReg(INCSR1, INCLRDT); USB_WriteReg(INDEX, 1); USB_WriteReg(OUTCSR1, OUTCLRDT); USB_EP0_Stage.bStage = USB_CtrlState_Idle; } if (intrin & EP0IF) { USB_WriteReg(INDEX, 0); csr = USB_ReadReg(CSR0); if (csr & STSTL) { USB_WriteReg(CSR0, csr & ~STSTL); USB_EP0_Stage.bStage = USB_CtrlState_Idle; } if (csr & SUEND) { USB_WriteReg(CSR0, csr | SSUEND); } switch (USB_EP0_Stage.bStage) { case USB_CtrlState_Idle: if (csr & OPRDY) { USB_EP0_Stage.bStage = USB_CtrlState_SettingUp; USB_ReadFIFO(FIFO0, (uint8_t *)&usb_request); ((uint8_t *)&USB_EP0_Stage.wResidue)[0] = usb_request.wLength.bb.bh; ((uint8_t *)&USB_EP0_Stage.wResidue)[1] = usb_request.wLength.bb.bl; switch (usb_request.bmRequestType & REQUEST_TYPE_MASK) { case USB_RequestType_Standard: switch (usb_request.bRequest) { case USB_StdReq_SetAddress: USB_WriteReg(FADDR, usb_request.wValue.bb.bl); break; case USB_StdReq_SetConfiguration: USB_SelectEndPoint(1); USB_WriteReg(INCSR2, INMODEIN); USB_WriteReg(INMAXP, 8); USB_SelectEndPoint(1); USB_WriteReg(INCSR2, INMODEOUT); USB_WriteReg(OUTMAXP, 8); USB_SelectEndPoint(0); break; case USB_StdReq_GetDescriptor: USB_EP0_Stage.bStage = USB_CtrlState_DataIn; switch (usb_request.wValue.bb.bh) { case USB_DescriptorType_Device: USB_EP0_Stage.pData = (uint8_t *)DEVICEDESC; len = sizeof(DEVICEDESC); break; case USB_DescriptorType_Configuration: USB_EP0_Stage.pData = (uint8_t *)CONFIGDESC; len = sizeof(CONFIGDESC); break; case USB_DescriptorType_String: switch (usb_request.wValue.bb.bl) { case 0: USB_EP0_Stage.pData = (uint8_t *)LANGIDDESC; len = sizeof(LANGIDDESC); break; case 1: USB_EP0_Stage.pData = (uint8_t *)MANUFACTDESC; len = sizeof(MANUFACTDESC); break; case 2: USB_EP0_Stage.pData = (uint8_t *)PRODUCTDESC; len = sizeof(PRODUCTDESC); break; default: USB_EP0_Stage.bStage = USB_CtrlState_Stalled; break; } break; case USB_DescriptorType_Report: USB_EP0_Stage.pData = (uint8_t *)HIDREPORTDESC; len = sizeof(HIDREPORTDESC); break; default: USB_EP0_Stage.bStage = USB_CtrlState_Stalled; break; } if (len < USB_EP0_Stage.wResidue) { USB_EP0_Stage.wResidue = len; } break; default: USB_EP0_Stage.bStage = USB_CtrlState_Stalled; break; } break; case USB_RequestType_Class: switch (usb_request.bRequest) { case USB_HidReq_GetReport: USB_EP0_Stage.pData = HidFreature; USB_EP0_Stage.bStage = USB_CtrlState_DataIn; break; case USB_HidReq_SetReport: USB_EP0_Stage.pData = HidFreature; USB_EP0_Stage.bStage = USB_CtrlState_DataOut; break; case USB_HidReq_SetIdle: break; // case USB_HidReq_GetIdle: // case USB_HidReq_GetProtocol: // case USB_HidReq_SetProtocol: default: USB_EP0_Stage.bStage = USB_CtrlState_Stalled; break; } break; default: USB_EP0_Stage.bStage = USB_CtrlState_Stalled; break; } switch (USB_EP0_Stage.bStage) { case USB_CtrlState_DataIn: USB_WriteReg(CSR0, SOPRDY); goto L_Ep0SendData; break; case USB_CtrlState_DataOut: USB_WriteReg(CSR0, SOPRDY); break; case USB_CtrlState_SettingUp: USB_WriteReg(CSR0, SOPRDY | DATEND); USB_EP0_Stage.bStage = USB_CtrlState_Idle; break; case USB_CtrlState_Stalled: USB_WriteReg(CSR0, SOPRDY | SDSTL); USB_EP0_Stage.bStage = USB_CtrlState_Idle; break; } } break; case USB_CtrlState_DataIn: if (!(csr & IPRDY)) { L_Ep0SendData: cnt = USB_EP0_Stage.wResidue > 64 ? 64 : USB_EP0_Stage.wResidue; USB_WriteFIFO(FIFO0, USB_EP0_Stage.pData, cnt); USB_EP0_Stage.wResidue -= cnt; USB_EP0_Stage.pData += cnt; if (USB_EP0_Stage.wResidue == 0) { USB_WriteReg(CSR0, IPRDY | DATEND); USB_EP0_Stage.bStage = USB_CtrlState_Idle; } else { USB_WriteReg(CSR0, IPRDY); } } break; case USB_CtrlState_DataOut: if (csr & OPRDY) { cnt = USB_ReadFIFO(FIFO0, USB_EP0_Stage.pData); USB_EP0_Stage.wResidue -= cnt; USB_EP0_Stage.pData += cnt; if (USB_EP0_Stage.wResidue == 0) { USB_WriteReg(CSR0, SOPRDY | DATEND); USB_EP0_Stage.bStage = USB_CtrlState_Idle; } else { USB_WriteReg(CSR0, SOPRDY); } } break; } } if (intrin & EP1INIF) { USB_WriteReg(INDEX, 1); csr = USB_ReadReg(INCSR1); if (csr & INSTSTL) { USB_WriteReg(INCSR1, INCLRDT); } if (csr & INUNDRUN) { USB_WriteReg(INCSR1, 0); } } if (introut & EP1OUTIF) { USB_WriteReg(INDEX, 1); csr = USB_ReadReg(OUTCSR1); if (csr & OUTSTSTL) { USB_WriteReg(OUTCSR1, OUTCLRDT); } if (csr & OUTOPRDY) { USB_ReadFIFO(FIFO1, HidOutput); USB_WriteReg(OUTCSR1, 0); P6 = ~HidOutput[0]; // update LED status } } } uint8_t KeyCount(uint16_t dat) { uint8_t i; i = 0; while (dat) { if (dat & 0x8000) i++; dat <<= 1; } return i; } //HidInput first byte for special keys，second byte is reserved，the reset 6 bytes for normal keys void SendKeyStatus(void) { uint8_t i,n; if(KeyCode) // if key pressed { // allow 3 keys pressed simultaneously if(KeyCount(KeyCode) > 3) { return; // too many keys } else { n = 2; for (i = 0; i < 16; i++) { if (i == 1) { if (KeyCode & (1 << i)) // left Ctrl { HidInput[0] |= 1; } else { HidInput[0] &= ~1; } } else if (i == 2) { if (KeyCode & (1 << i)) // left alt { HidInput[0] |= 1 << 2; } else { HidInput[0] &= ~(1 << 2); } } else { if (KeyCode & (1 << i)) { HidInput[n++] = KeyMap[i]; } } } for(; n<8; n++) { HidInput[n]=0; // fill 0 to the rest } } } else // if no key pressed, return 0 { for (i = 0; i < 8; i++) { HidInput[i] = 0; } } // return 8 bytes data USB_WriteReg(INDEX, 1); for (i = 0; i < 8; i++) { USB_WriteReg(FIFO1, HidInput[i]); } USB_WriteReg(INCSR1, INIPRDY); } INTERRUPT(Timer0_Routine, EXTI_VectTimer0) { B_1ms = 1; } /***************************************************** Key Matrix Scan Y P04 P05 P06 P07 | | | | X | | | | P00 ---- K00 ---- K01 ---- K02 ---- K03 ---- | | | | P01 ---- K04 ---- K05 ---- K06 ---- K07 ---- | | | | P02 ---- K08 ---- K09 ---- K10 ---- K11 ---- | | | | P03 ---- K12 ---- K13 ---- K14 ---- K15 ---- | | | | ******************************************************/ void KeyScan(void) { uint8_t temp; KeyIO = 0x0F; SYS_DelayUs(1); if ((KeyIO & 0x0F) == 0x0F) // no key pressed { NewKeyCode = 0; } else // start scan { // scan first line KeyIO = (uint8_t)~0x10; SYS_DelayUs(1); // save 4 keys status temp = KeyIO & 0x0F; // second line KeyIO = (uint8_t)~0x20; SYS_DelayUs(1); temp |= KeyIO << 4; // save current key status NewKeyCode = (~temp) & 0xFF; // third line KeyIO = (uint8_t)~0x40; SYS_DelayUs(1); temp = KeyIO & 0x0F; // 4th line KeyIO = (uint8_t)~0x80; SYS_DelayUs(1); temp |= KeyIO << 4; // save all 16 keys' status in 2 bytes, 1 indicates key pressed NewKeyCode |= (((uint16_t)~temp) << 8); } if (NewKeyCode != OldKeyCode) { KeyHoldTime = 0; OldKeyCode = NewKeyCode; KeyChangeTemp = 1; } else { KeyHoldTime++; if (KeyHoldTime >= 1) { KeyHoldTime = 1; KeyCode = OldKeyCode; if (KeyChangeTemp) { KeyChangeTemp = 0; KeyChangeFlag = 1; // Set send flag } } } } __CODE uint8_t DEVICEDESC[18] = { 0x12, //bLength(18); 0x01, //bDescriptorType(Device); 0x00,0x02, //bcdUSB(2.00); 0x00, //bDeviceClass(0); 0x00, //bDeviceSubClass0); 0x00, //bDeviceProtocol(0); 0x40, //bMaxPacketSize0(64); 0x54,0x53, //idVendor(5354); 0x80,0x44, //idProduct(4480); 0x00,0x01, //bcdDevice(1.00); 0x01, //iManufacturer(1); 0x02, //iProduct(2); 0x03, //iSerialNumber(3); 0x01, //bNumConfigurations(1); }; __CODE uint8_t CONFIGDESC[41] = { 0x09, //bLength(9); 0x02, //bDescriptorType(Configuration); 0x29,0x00, //wTotalLength(41); 0x01, //bNumInterfaces(1); 0x01, //bConfigurationValue(1); 0x00, //iConfiguration(0); 0xa0, //bmAttributes(BUSPower); 0xc8, //MaxPower(400mA); 0x09, //bLength(9); 0x04, //bDescriptorType(Interface); 0x00, //bInterfaceNumber(0); 0x00, //bAlternateSetting(0); 0x02, //bNumEndpoints(2); 0x03, //bInterfaceClass(HID); 0x01, //bInterfaceSubClass(1); 0x01, //bInterfaceProtocol(1); 0x00, //iInterface(0); 0x09, //bLength(9); 0x21, //bDescriptorType(HID); 0x01,0x10, //bcdHID(1.01); 0x00, //bCountryCode(0); 0x01, //bNumDescriptors(1); 0x22, //bDescriptorType(HID Report); 0x3f,0x00, //wDescriptorLength(63); 0x07, //bLength(7); 0x05, //bDescriptorType(Endpoint); 0x81, //bEndpointAddress(EndPoint1 as IN); 0x03, //bmAttributes(Interrupt); 0x40,0x00, //wMaxPacketSize(64); 0x0a, //bInterval(10ms); 0x07, //bLength(7); 0x05, //bDescriptorType(Endpoint); 0x01, //bEndpointAddress(EndPoint1 as OUT); 0x03, //bmAttributes(Interrupt); 0x40,0x00, //wMaxPacketSize(64); 0x0a, //bInterval(10ms); }; __CODE uint8_t HIDREPORTDESC[63] = { 0x05, 0x01, // USAGE_PAGE (Generic Desktop) 0x09, 0x06, // USAGE (Keyboard) 0xa1, 0x01, // COLLECTION (Application) 0x05, 0x07, // USAGE_PAGE (Keyboard) 0x19, 0xe0, // USAGE_MINIMUM (Keyboard LeftControl) 0x29, 0xe7, // USAGE_MAXIMUM (Keyboard Right GUI) 0x15, 0x00, // LOGICAL_MINIMUM (0) 0x25, 0x01, // LOGICAL_MAXIMUM (1) 0x75, 0x01, // REPORT_SIZE (1) 0x95, 0x08, // REPORT_COUNT (8) 0x81, 0x02, // INPUT (Data,Var,Abs) 0x95, 0x01, // REPORT_COUNT (1) 0x75, 0x08, // REPORT_SIZE (8) 0x81, 0x03, // INPUT (Cnst,Var,Abs) 0x95, 0x05, // REPORT_COUNT (5) 0x75, 0x01, // REPORT_SIZE (1) 0x05, 0x08, // USAGE_PAGE (LEDs) 0x19, 0x01, // USAGE_MINIMUM (Num Lock) 0x29, 0x05, // USAGE_MAXIMUM (Kana) 0x91, 0x02, // OUTPUT (Data,Var,Abs) 0x95, 0x01, // REPORT_COUNT (1) 0x75, 0x03, // REPORT_SIZE (3) 0x91, 0x03, // OUTPUT (Cnst,Var,Abs) 0x95, 0x06, // REPORT_COUNT (6) 0x75, 0x08, // REPORT_SIZE (8) 0x15, 0x00, // LOGICAL_MINIMUM (0) 0x25, 0xFF, // LOGICAL_MAXIMUM (255) 0x05, 0x07, // USAGE_PAGE (Keyboard) 0x19, 0x00, // USAGE_MINIMUM (Reserved (no event indicated)) 0x29, 0x65, // USAGE_MAXIMUM (Keyboard Application) 0x81, 0x00, // INPUT (Data,Ary,Abs) 0xc0 // END_COLLECTION }; __CODE uint8_t LANGIDDESC[4] = { 0x04,0x03, 0x09,0x04, }; __CODE uint8_t MANUFACTDESC[8] = { 0x08,0x03, 'S',0, 'T',0, 'C',0, }; __CODE uint8_t PRODUCTDESC[30] = { 0x1e,0x03, 'S',0, 'T',0, 'C',0, ' ',0, 'U',0, 'S',0, 'B',0, ' ',0, 'D',0, 'e',0, 'v',0, 'i',0, 'c',0, 'e',0, }; __CODE uint8_t KeyMap[16] = { 0x53, //0: Num Lock 0xFF, //1: NULL - Left Ctrl 0xFF, //2: NULL - Left ALT 0x2A, //3: BackSpace 0x5F, //4: 7 0x60, //5: 8 0x61, //6: 9 0x62, //7: 0 0x5C, //8: 4 0x5D, //9: 5 0x5E, //A: 6 0x63, //B: DEL 0x59, //C: 1 0x5A, //D: 2 0x5B, //E: 3 0x58, //F: Return };