790 lines
29 KiB
C
790 lines
29 KiB
C
/********************************** (C) COPYRIGHT ******************************
|
||
* File Name : USB.C
|
||
* Author : QITAS
|
||
* Version : V1.0
|
||
* Date : 2018/06/05
|
||
* Description : USB通信定义
|
||
********************************************************************************/
|
||
#include <stdio.h>
|
||
#include <stdlib.h>
|
||
#include <string.h>
|
||
|
||
#include "CH554.h"
|
||
#include "common.h"
|
||
#include "USB.h"
|
||
|
||
#pragma NOAREGS
|
||
|
||
#define BUFFER_SIZE 64
|
||
//#define DUAL_BUFFER_SIZE 128
|
||
#define UsbSetupBuf ((PUSB_SETUP_REQ)Ep0Buffer)
|
||
|
||
|
||
UINT8X Ep0Buffer[DEFAULT_ENDP0_SIZE] _at_ 0x0000; // Endpoint 0, buffer OUT/OUT，the address must be even.
|
||
UINT8X Ep1Buffer[BUFFER_SIZE] _at_ 0x000A; // Endpoint 1, buffer IN，the address must be even.
|
||
UINT8X Ep2Buffer[BUFFER_SIZE*2] _at_ 0x0050; // Endpoint 2, buffer OUT[64]+IN[64]，the address must be even.
|
||
|
||
/**************************** Global variable ********************************/
|
||
UINT8 volatile SetupReq, SetupLen, UsbConfig;
|
||
UINT8 volatile EnumOK, FLAG;
|
||
|
||
PUINT8 pDescr; // USB enumerate complete flag.
|
||
USB_SETUP_REQ SetupReqBuf; // A buffer for Setup package.
|
||
|
||
UINT8 HIDKey[8] = {0};
|
||
|
||
//UINT8X TX[64] = {0};
|
||
//UINT8X RX[64] = {0};
|
||
//UINT8X DIS_LED[56*3] = {0};
|
||
|
||
UINT8X USB_BUF[128] = {0};
|
||
|
||
UINT8 TXflag = 0;
|
||
UINT8 RXflag = 0;
|
||
|
||
/****************************LV.4 其他描述符 *********************************/
|
||
// 语言描述符
|
||
UINT8C MyLangDescr[] = { 0x04, 0x03, 0x09, 0x04 };
|
||
// 厂家信息
|
||
UINT8C MyManuInfo[] = { 0x0E, 0x03, 'O', 0, 'A', 0, 'Z', 0, 'O', 0, 'N', 0 };
|
||
// 产品信息
|
||
UINT8C MyProdInfo[] = { 0x0C, 0x03, 'Q', 0, 'i', 0, 't', 0, 'a', 0, 's', 0 };
|
||
|
||
|
||
/**************************** Device Descriptor *************************************/
|
||
UINT8C DevDesc[18] = { // Device Descriptor
|
||
0x12,0x01,
|
||
0x10,0x01, //USB1.1
|
||
0x00,0x00,
|
||
0x00,
|
||
0x08, //PACKAGE SIZE 8B
|
||
|
||
0x31,0x51, // Vendor ID | VID = 0X5131///413c
|
||
0x07,0x20, // Product ID | PID = 0X2007 /// 2105
|
||
// 0x00,0x01,
|
||
// 0x05,0x21,
|
||
0x01,0x00, // bcdDevice:ver 1.00
|
||
0x02,0x04, // manufactor / product
|
||
0x00,0x01 //serialnum /confignum
|
||
};
|
||
/**************************** HID Report Descriptor *********************************/
|
||
UINT8C KeyRepDesc[65] = // Report Descriptor, DELL Keyboard
|
||
{
|
||
0x05, 0x01, // Usage page Generatic Desktop
|
||
0x09, 0x06, // Usage keyboard
|
||
0xa1, 0x01, // Collation Application
|
||
0x05, 0x07, // Usafe page (key code)
|
||
0x19, 0xe0, // Usage Min ( E0 --> L_CTL)
|
||
0x29, 0xe7, // Usage MAX ( E7 --> R_GUI )
|
||
0x15, 0x00, // Logical min
|
||
0x25, 0x01, // Logical max
|
||
0x95, 0x08, // Report count ( 8 )
|
||
0x75, 0x01, // Report size ( 1 )
|
||
0x81, 0x02, // Input ( Data, Variable, Absolute )
|
||
0x95, 0x08, // Report count ( 8 )
|
||
0x75, 0x01, // Report size ( 1 )
|
||
0x81, 0x01, // Input ( const )
|
||
0x05, 0x08, // Usage page( LED )
|
||
0x19, 0x01, // Usage min ( 1 )
|
||
0x29, 0x03, // Usage max ( 3 )
|
||
0x95, 0x03, // Report count ( 3 )
|
||
0x75, 0x01, // Report size ( 1 )
|
||
0x91, 0x02, // Output ( Data, Variable, Absolute )
|
||
0x95, 0x01, // Report count ( 1 )
|
||
0x75, 0x05, // Report size ( 5 )
|
||
0x91, 0x01, // Output ( const )
|
||
0x05, 0x07, // Usage page ( key code )
|
||
0x19, 0x00, // Usage min ( 0H )
|
||
0x2a, 0xff, 0x00, // Usage max ( FFH )
|
||
0x15, 0x00, // Logical min ( 0H )
|
||
0x26, 0xff, 0x00, // Logical max ( FFH )
|
||
0x95, 0x06, // Report count ( 6 )
|
||
0x75, 0x08, // Report size ( 8 )
|
||
0x81, 0x00, // Input ( Data, Array, Absolute )
|
||
0xc0 // End collection
|
||
};
|
||
|
||
UINT8C ComRepDesc[34] = // Report Descriptor, Composite device
|
||
{
|
||
0x06, 0x00, 0xff, // Usage page Vendor defined
|
||
0x09, 0x01, // Usage keyboard
|
||
0xa1, 0x01, // Collation Application
|
||
0x09, 0x02, // Mouse
|
||
0x15, 0x00, // Logical min ( 0H )
|
||
0x26, 0x00, 0xff, // Logical max ( FFH )
|
||
0x75, 0x08, // Report size ( 08H )
|
||
0x95, 0x40, // Report count ( 40H )
|
||
0x81, 0x06, // Input ( Data, Relative, Wrap )
|
||
0x09, 0x02, // Mouse
|
||
0x15, 0x00, // Logical min ( 0H )
|
||
0x26, 0x00, 0xff, // Logical max ( FFH )
|
||
0x75, 0x08, // Report size ( 08H )
|
||
0x95, 0x40, // Report count ( 40H )
|
||
0x91, 0x06, // Output ( Data, Relative, Wrap )
|
||
0xc0,
|
||
};
|
||
|
||
/****************************LV.2 配置描述符 *********************************/
|
||
//USB_DESCR_TYP_INTERF==4
|
||
//USB_DESCR_TYP_CONFIG==2
|
||
//USB_DESCR_TYP_ENDP==5
|
||
|
||
UINT8C CfgDesc[9+9+9+7+9+9+7+7] =
|
||
{
|
||
0x09,0x02,0x42,0x00,0x02,0x01,0x00,0xA0,0x32, // Configure Descriptor
|
||
|
||
0x09,0x04,0x00,0x00,0x02,0x03,0x00,0x00,0x00, // Interface Descriptor: Composite device， 2 EPs
|
||
0x09,0x21,0x10,0x01,0x21,0x01,0X22,sizeof(ComRepDesc),0x00, // HID Descriptor
|
||
|
||
0x07,0x05,0x82,0x03,0x40,0x00,0x32, // Endpoint Descriptor, 10ms, IN
|
||
0x07,0x05,0x02,0x03,0x40,0x00,0x0a, // Endpoint Descriptor, 10ms, OUT
|
||
|
||
0x09,0x04,0x01,0x00,0x01,0x03,0x01,0x01,0x00, // Interface Descriptor: keyboard
|
||
0x09,0x21,0x11,0x01,0x00,0x01,0x22,sizeof(KeyRepDesc),0x00, // HID Descriptor
|
||
|
||
0x07,0x05,0x81,0x03,0x08,0x00,0x0a // Endpoint Descriptor, 50ms
|
||
};
|
||
|
||
|
||
/*******************************************************************************
|
||
* Function Name : USBDeviceInit()
|
||
* Description : Configure USB mode ，USB device init configure.Configure tie Endpoint, compound device,
|
||
Endpoint 0 control trans, Endpoint 1/2 interrupt(IN).
|
||
* Input : None
|
||
* Output : None
|
||
* Return : None
|
||
*******************************************************************************/
|
||
void USBDeviceInit()
|
||
{
|
||
IE_USB = 0;
|
||
USB_CTRL = 0x00; // Device mode
|
||
|
||
UEP1_DMA = Ep1Buffer; // Endpoint 1 uploard address
|
||
UEP0_DMA = Ep0Buffer; // Endpoint 0 trans address
|
||
UEP2_DMA = Ep2Buffer; // Endpoint 2 uploard address
|
||
|
||
UEP4_1_MOD = UEP4_1_MOD | bUEP1_TX_EN & ~(bUEP1_RX_EN | bUEP1_BUF_MOD | bUEP4_RX_EN | bUEP4_TX_EN); // Endpoint 1 sigle 64 byte send buffer, Endpoint 4 disable
|
||
UEP1_CTRL = bUEP_AUTO_TOG | UEP_T_RES_NAK; // Endpoint 1 auto Toggle flag, In translation return NAK
|
||
UEP0_CTRL = UEP_R_RES_ACK | UEP_T_RES_NAK; // Endpoint 0 OUT trans return ACK, IN trans return NAK
|
||
|
||
UEP2_3_MOD = UEP2_3_MOD | bUEP2_TX_EN | bUEP2_RX_EN & ~bUEP2_BUF_MOD; // Endpoint 2 sigle 64 byte send buffer OUT[64]+IN[64] (OUT first)
|
||
UEP2_CTRL = bUEP_AUTO_TOG | UEP_T_RES_NAK; // Endpoint 2 auto Toggle flag, IN trans return NAK
|
||
|
||
USB_DEV_AD = 0x00; // Initial the device address
|
||
UDEV_CTRL = bUD_PD_DIS; // Disable DM/PM PULL_DOWN.
|
||
USB_CTRL = bUC_DEV_PU_EN | bUC_INT_BUSY | bUC_DMA_EN; // Enable inter PULL_UP. Auto return NAK, during interrupt routing, if the interrupt flag.
|
||
UDEV_CTRL |= bUD_PORT_EN; // Enable USB port.
|
||
USB_INT_FG = 0xFF; // Clear interrupt flag.
|
||
USB_INT_EN = bUIE_SUSPEND | bUIE_TRANSFER | bUIE_BUS_RST; // Enable USB interrupt
|
||
IE_USB = 1; // Enable USB interrupt
|
||
UEP1_T_LEN = 0; // Reset the trans length register
|
||
UEP2_T_LEN = 0;
|
||
}
|
||
/*******************************************************************************
|
||
* Function Name : Enp1IntIn()
|
||
* Description : USB Device mode Endpoint 1 upload data, Interrupt mode
|
||
* Input : None
|
||
* Output : None
|
||
* Return : None
|
||
*******************************************************************************/
|
||
static void Enp1IntIn( void )
|
||
{
|
||
memcpy( Ep1Buffer, HIDKey, sizeof(HIDKey)); // Upload data
|
||
UEP1_T_LEN = sizeof(HIDKey); // Upload length
|
||
UEP1_CTRL = UEP1_CTRL & ~ MASK_UEP_T_RES | UEP_T_RES_ACK; // Return ACK
|
||
while(( UEP1_CTRL & MASK_UEP_T_RES ) == UEP_T_RES_ACK); // Waiting upload complete, avoid overwriting
|
||
}
|
||
/*******************************************************************************
|
||
* Function Name : Enp2IntIn(UINT8 len)
|
||
* Description : USB Device mode Endpoint 2 upload data, Interrupt mode
|
||
* Input : None
|
||
* Output : None
|
||
* Return : None
|
||
*******************************************************************************/
|
||
void Enp2IntIn(UINT8 len)
|
||
{
|
||
memcpy( Ep2Buffer+MAX_PACKET_SIZE, USB_BUF, len); // Upload data
|
||
UEP2_T_LEN = len; // Upload length
|
||
UEP2_CTRL = UEP2_CTRL & ~ MASK_UEP_T_RES | UEP_T_RES_ACK; // Return ACK
|
||
//while(( UEP2_CTRL & MASK_UEP_T_RES ) == UEP_T_RES_ACK); // Waiting upload complete, avoid overwriting
|
||
}
|
||
/*******************************************************************************
|
||
* Function Name : Enp2TX(UINT8)
|
||
* Description : USB Device mode Endpoint 2 upload data, Interrupt mode
|
||
* Input : None
|
||
* Output : None
|
||
* Return : None
|
||
*******************************************************************************/
|
||
void Enp2TX(UINT8 len)
|
||
{
|
||
memcpy( Ep2Buffer+MAX_PACKET_SIZE, USB_BUF, len); // Upload data
|
||
UEP2_T_LEN = len; // Upload length
|
||
UEP2_CTRL = UEP2_CTRL & ~ MASK_UEP_T_RES | UEP_T_RES_ACK; // 允许上传 Return ACK
|
||
while(( UEP2_CTRL & MASK_UEP_T_RES ) == UEP_T_RES_ACK); // Waiting upload complete, avoid overwriting
|
||
}
|
||
|
||
/*******************************************************************************
|
||
* Function Name : Enp2RX()
|
||
* Description : USB Device mode Endpoint 2 upload data, Interrupt mode
|
||
* Input : None
|
||
* Output : None
|
||
* Return : None
|
||
*******************************************************************************/
|
||
void Enp2RX()
|
||
{
|
||
UINT8 len;
|
||
if(Ep2Buffer[2]==HEADER_MAGIC)
|
||
{
|
||
RXflag = Ep2Buffer[3];
|
||
len = Ep2Buffer[4]*Ep2Buffer[5];
|
||
if(len<128) memcpy(USB_BUF+len,Ep2Buffer+6, Ep2Buffer[5]);
|
||
if(RXflag==CMD_SET_USB)
|
||
{
|
||
|
||
}
|
||
else if(RXflag==CMD_SET_POP)
|
||
{
|
||
|
||
}
|
||
else if(RXflag==CMD_SET_TST)
|
||
{
|
||
|
||
}
|
||
else
|
||
{
|
||
len = USB_RX_LEN;
|
||
memcpy(USB_BUF,Ep2Buffer,len);
|
||
Enp2IntIn(len);
|
||
}
|
||
}
|
||
}
|
||
|
||
/*******************************************************************************
|
||
* Function Name : DeviceInterrupt()
|
||
* Description : USB ISR
|
||
*******************************************************************************/
|
||
void DeviceInterrupt( void ) interrupt INT_NO_USB using 1 //USB ISR, Using register 1
|
||
{
|
||
UINT8 len;
|
||
|
||
if( UIF_TRANSFER ) //USB trans flag
|
||
{
|
||
switch (USB_INT_ST & (MASK_UIS_TOKEN | MASK_UIS_ENDP) )
|
||
{
|
||
case UIS_TOKEN_IN | 1: // Endpoint 1 upload
|
||
{
|
||
UEP1_T_LEN = 0; // Reset length
|
||
UEP1_CTRL = UEP1_CTRL & ~ MASK_UEP_T_RES | UEP_T_RES_NAK; // Default return NAK
|
||
FLAG |= 0x01; // Upload complete flag
|
||
break;
|
||
}
|
||
case UIS_TOKEN_IN | 2: // Endpoint 2 upload
|
||
{
|
||
UEP2_T_LEN = 0; // Reset length
|
||
UEP2_CTRL = UEP2_CTRL & ~ MASK_UEP_T_RES | UEP_T_RES_NAK; // Default return NAK
|
||
break;
|
||
}
|
||
case UIS_TOKEN_OUT | 2: // Eendpoint 2 download
|
||
if ( U_TOG_OK ) // 不同步的数据包将丢弃
|
||
{
|
||
Enp2RX();
|
||
}
|
||
case UIS_TOKEN_SETUP | 0:
|
||
{
|
||
len = USB_RX_LEN;
|
||
if( len == (sizeof(USB_SETUP_REQ)) )
|
||
{
|
||
SetupLen = UsbSetupBuf->wLengthL;
|
||
if(UsbSetupBuf->wLengthH || SetupLen > 0x7F )
|
||
{
|
||
SetupLen = 0x7F; // Total length less than 0X7F
|
||
}
|
||
len = 0; // Default length is 0
|
||
if( (UsbSetupBuf->bRequestType & USB_REQ_TYP_MASK) != USB_REQ_TYP_STANDARD ) /* 非标准请求 */
|
||
{
|
||
if( (UsbSetupBuf->bRequestType == 0x21)&&(UsbSetupBuf->bRequest == HID_SET_REPORT) )//Init ok
|
||
{
|
||
EnumOK = 1; // Class require, SET REPORT, indicate the enumerate complete
|
||
}
|
||
if( (UsbSetupBuf->bRequestType == 0x21)&&(UsbSetupBuf->bRequest == HID_SET_IDLE) )
|
||
{
|
||
UEP0_T_LEN = 0; //Status stage complete, upload 0 data packet, end the control trans
|
||
// UEP0_CTRL = bUEP_R_TOG | bUEP_T_TOG | UEP_R_RES_STALL | UEP_T_RES_STALL;
|
||
}
|
||
len = 0; // Fail
|
||
}
|
||
else
|
||
{ // Deal with the standard require
|
||
SetupReq = UsbSetupBuf->bRequest;
|
||
switch( SetupReq ) // Require code
|
||
{
|
||
case USB_GET_DESCRIPTOR:
|
||
{
|
||
switch( UsbSetupBuf->wValueH )
|
||
{
|
||
case 1: // Device descriptor// 设备描述符
|
||
pDescr = DevDesc; // Write device descriptor to buffer
|
||
len = sizeof( DevDesc );
|
||
break;
|
||
case 2: // Configuration descriptor // 配置描述符
|
||
pDescr = CfgDesc; // Write configuration descriptor to buffer
|
||
len = sizeof( CfgDesc );
|
||
break;
|
||
case 3: // 字符串描述符
|
||
{
|
||
switch( UsbSetupBuf->wValueL )
|
||
{
|
||
case 0:
|
||
pDescr = (PUINT8)( &MyLangDescr[0] );
|
||
len = sizeof( MyLangDescr );
|
||
break;
|
||
case 2:
|
||
pDescr = (PUINT8)( &MyManuInfo[0] );
|
||
len = sizeof( MyManuInfo );
|
||
break;
|
||
case 4:
|
||
pDescr = (PUINT8)( &MyProdInfo[0] );
|
||
len = sizeof( MyProdInfo );
|
||
break;
|
||
|
||
default:
|
||
len = 0xFF; // 不支持的字符串描述符
|
||
break;
|
||
}
|
||
break;
|
||
}
|
||
case 0x22: // HID report descriptor
|
||
{
|
||
if( UsbSetupBuf->wIndexL == 1 ) // Interface index 0 HID report --> keyboard
|
||
{
|
||
pDescr = KeyRepDesc; // Write to buffer
|
||
len = sizeof( KeyRepDesc );
|
||
}
|
||
// if( UsbSetupBuf->wIndexL == 0 ) // Interface index 1 HID report --> Composite device
|
||
// {
|
||
// pDescr = ComRepDesc; // Write to buffer
|
||
// len = sizeof( ComRepDesc );
|
||
// }
|
||
else if(UsbSetupBuf->wIndexL == 0) // Interface index 1 HID report --> Composite device
|
||
{
|
||
pDescr = ComRepDesc; // Write to buffer
|
||
len = sizeof( ComRepDesc );
|
||
}
|
||
else
|
||
{
|
||
len = 0xff; // Add interface index, if required
|
||
}
|
||
break;
|
||
}
|
||
default:
|
||
len = 0xff; // Length equal 0 if code error
|
||
break;
|
||
}
|
||
|
||
if ( len == 0xff ){
|
||
break; // Error code, jump out the swith sentence
|
||
}
|
||
if ( SetupLen > len ){
|
||
SetupLen = len; // Limit the total length
|
||
}
|
||
len = SetupLen >= 8 ? 8 : SetupLen; // Upload this length
|
||
memcpy( Ep0Buffer, pDescr, len ); // Upload data
|
||
SetupLen -= len;
|
||
pDescr += len;
|
||
break;
|
||
}
|
||
case USB_SET_ADDRESS:
|
||
SetupLen = UsbSetupBuf->wValueL; // Save the device address
|
||
break;
|
||
case USB_GET_CONFIGURATION:
|
||
{
|
||
Ep0Buffer[0] = UsbConfig;
|
||
if ( SetupLen >= 1 )
|
||
{
|
||
len = 1;
|
||
}
|
||
break;
|
||
}
|
||
case USB_SET_CONFIGURATION:
|
||
{
|
||
UsbConfig = UsbSetupBuf->wValueL;
|
||
break;
|
||
}
|
||
case 0x0A:
|
||
break;
|
||
case USB_CLEAR_FEATURE: //Clear Feature
|
||
{
|
||
if ( (UsbSetupBuf->bRequestType & USB_REQ_RECIP_MASK) == USB_REQ_RECIP_ENDP )
|
||
{
|
||
switch( UsbSetupBuf->wIndexL )
|
||
{
|
||
case 0x82:
|
||
UEP2_CTRL = UEP2_CTRL & ~ (bUEP_T_TOG | MASK_UEP_T_RES) | UEP_T_RES_NAK;
|
||
break;
|
||
case 0x81:
|
||
UEP1_CTRL = UEP1_CTRL & ~ (bUEP_T_TOG | MASK_UEP_T_RES) | UEP_T_RES_NAK;
|
||
break;
|
||
case 0x01:
|
||
UEP1_CTRL = UEP1_CTRL & ~ (bUEP_R_TOG | MASK_UEP_R_RES) | UEP_R_RES_ACK;
|
||
break;
|
||
default:
|
||
len = 0xFF; // Error endpoint
|
||
break;
|
||
}
|
||
}
|
||
else
|
||
{
|
||
len = 0xFF; // Deal with the error endpoint
|
||
}
|
||
break;
|
||
}
|
||
case USB_SET_FEATURE: // Set Feature
|
||
{
|
||
if( (UsbSetupBuf->bRequestType & 0x1F) == 0x00 )
|
||
{
|
||
if( ( ((UINT16)UsbSetupBuf->wValueH << 8) | UsbSetupBuf->wValueL ) == 0x01 )
|
||
{
|
||
if( CfgDesc[ 7 ] & 0x20 )
|
||
{
|
||
/* Awake the device */
|
||
}
|
||
else
|
||
{
|
||
len = 0xFF; // Error routing
|
||
}
|
||
}
|
||
else
|
||
{
|
||
len = 0xFF; // Error routing
|
||
}
|
||
}
|
||
else
|
||
{
|
||
if( (UsbSetupBuf->bRequestType & 0x1F) == 0x02 ) // Set endpoint
|
||
{
|
||
if( ( ((UINT16)UsbSetupBuf->wValueH << 8) | UsbSetupBuf->wValueL ) == 0x00 )
|
||
{
|
||
switch( ((UINT16)UsbSetupBuf->wIndexH << 8) | UsbSetupBuf->wIndexL )
|
||
{
|
||
case 0x82:
|
||
UEP2_CTRL = UEP2_CTRL & (~bUEP_T_TOG) | UEP_T_RES_STALL;/* Endpoint 2 IN STALL */
|
||
break;
|
||
|
||
case 0x02:
|
||
UEP2_CTRL = UEP2_CTRL & (~bUEP_R_TOG) | UEP_R_RES_STALL;/* Endpoint 2 OUT STALL */
|
||
break;
|
||
|
||
case 0x81:
|
||
UEP1_CTRL = UEP1_CTRL & (~bUEP_T_TOG) | UEP_T_RES_STALL;/* Endpoint 1 IN STALL */
|
||
break;
|
||
|
||
default:
|
||
len = 0xFF; // Error routing
|
||
break;
|
||
}
|
||
}
|
||
else
|
||
{
|
||
len = 0xFF; // Error routing
|
||
}
|
||
}
|
||
else
|
||
{
|
||
len = 0xFF; // Error routing
|
||
}
|
||
}
|
||
break;
|
||
}
|
||
case USB_GET_STATUS: // Get status
|
||
{
|
||
Ep0Buffer[0] = 0x00;
|
||
Ep0Buffer[1] = 0x00;
|
||
if ( SetupLen >= 2 )
|
||
{
|
||
len = 2;
|
||
}
|
||
else
|
||
{
|
||
len = SetupLen;
|
||
}
|
||
break;
|
||
}
|
||
default:
|
||
len = 0xff; // Error routing
|
||
break;
|
||
}
|
||
}
|
||
}
|
||
else
|
||
{
|
||
len = 0xff; //Packet length error
|
||
}
|
||
if(len == 0xff)
|
||
{
|
||
SetupReq = 0xFF;
|
||
// UEP0_CTRL = bUEP_R_TOG | bUEP_T_TOG | UEP_R_RES_STALL | UEP_T_RES_STALL; // Control endpoint should not return STALL,
|
||
// if Send STALL, that means the device has no ability to communicate with the host
|
||
}
|
||
else if(len <= 8) // Upload the data or return the 0 data packet
|
||
{
|
||
UEP0_T_LEN = len;
|
||
UEP0_CTRL = bUEP_R_TOG | bUEP_T_TOG | UEP_R_RES_ACK | UEP_T_RES_ACK; // Default data packet is DATA1, and return ACK
|
||
}
|
||
else
|
||
{
|
||
UEP0_T_LEN = 0; // Upload 0 data packet, incase the host go to status stage ahead, and get fault code
|
||
UEP0_CTRL = bUEP_R_TOG | bUEP_T_TOG | UEP_R_RES_ACK | UEP_T_RES_ACK; // Default data packet is DATA1, and return ACK
|
||
}
|
||
break;
|
||
}
|
||
case UIS_TOKEN_IN | 0: // Endpoint 0 IN
|
||
{
|
||
switch(SetupReq)
|
||
{
|
||
case USB_GET_DESCRIPTOR:
|
||
len = SetupLen >= 8 ? 8 : SetupLen; // Current length
|
||
memcpy( Ep0Buffer, pDescr, len ); // Upload the data
|
||
SetupLen -= len;
|
||
pDescr += len;
|
||
UEP0_T_LEN = len;
|
||
UEP0_CTRL ^= bUEP_T_TOG; //Toggle Sysc flag
|
||
break;
|
||
case USB_SET_ADDRESS:
|
||
USB_DEV_AD = USB_DEV_AD & bUDA_GP_BIT | SetupLen;
|
||
UEP0_CTRL = UEP_R_RES_ACK | UEP_T_RES_NAK;
|
||
break;
|
||
default:
|
||
// UEP0_T_LEN = 0; //Status stage complete, upload 0 data packet, end the control trans
|
||
// UEP0_CTRL = UEP_R_RES_ACK | UEP_T_RES_NAK;
|
||
break;
|
||
}
|
||
if(len == 0xff)
|
||
{
|
||
UEP0_T_LEN = 0; //Status stage complete, upload 0 data packet, end the control trans
|
||
UEP0_CTRL = UEP_R_RES_ACK | UEP_T_RES_NAK;
|
||
}
|
||
break;
|
||
}
|
||
case UIS_TOKEN_OUT | 0: // Endpoint 0 OUT
|
||
{
|
||
len = USB_RX_LEN;
|
||
if( SetupReq == 0x09 )
|
||
{
|
||
if( Ep0Buffer[0] )
|
||
{
|
||
|
||
}
|
||
else if( Ep0Buffer[0] == 0)
|
||
{
|
||
|
||
}
|
||
}
|
||
UEP0_T_LEN = 0; // Upload 0 data packet, incase the host go to status stage ahead, and get fault code
|
||
UEP0_CTRL = UEP_R_RES_ACK | UEP_T_RES_ACK; // Default data packet is DATA1, and return ACK
|
||
break;
|
||
}
|
||
default:
|
||
break;
|
||
}
|
||
UIF_TRANSFER = 0; // Reset the trans interrupt
|
||
}// end if( UIF_TRANSFER )
|
||
if( UIF_BUS_RST ) // Device mode Bus reset
|
||
{
|
||
UEP0_CTRL = UEP_R_RES_ACK | UEP_T_RES_NAK;
|
||
UEP1_CTRL = bUEP_AUTO_TOG | UEP_R_RES_ACK;
|
||
UEP2_CTRL = bUEP_AUTO_TOG | UEP_R_RES_ACK | UEP_T_RES_NAK;
|
||
USB_DEV_AD = 0x00;
|
||
UIF_SUSPEND = 0;
|
||
UIF_TRANSFER = 0;
|
||
UIF_BUS_RST = 0; // Reset Reset interrupt
|
||
}
|
||
if( UIF_SUSPEND ) // USB Suspended and Awake interrupt
|
||
{
|
||
UIF_SUSPEND = 0;
|
||
if ( USB_MIS_ST & bUMS_SUSPEND ) // Suspended
|
||
{
|
||
while ( XBUS_AUX & bUART0_TX ); // Waiting send complete ...
|
||
SAFE_MOD = 0x55;
|
||
SAFE_MOD = 0xAA;
|
||
WAKE_CTRL = bWAK_BY_USB | bWAK_RXD0_LO; // Action on USB Bus, or RXD0, will awake the device
|
||
PCON |= PD; // LPM
|
||
SAFE_MOD = 0x55;
|
||
SAFE_MOD = 0xAA;
|
||
WAKE_CTRL = 0x00;
|
||
}
|
||
}
|
||
else
|
||
{ // Unexpected interrupt
|
||
USB_INT_FG = 0xFF; // Reset the interrupt
|
||
}
|
||
}
|
||
|
||
/*******************************************************************************
|
||
* Function Name : static SendKey( char *p)
|
||
* Description : ASCII to key code
|
||
* Input : char *p
|
||
* Output : None
|
||
* Return : None
|
||
*******************************************************************************/
|
||
static void SendKey( char *p )
|
||
{
|
||
char c = *p;
|
||
if( (c >= 'a') && (c <= 'z' ))
|
||
{
|
||
c = c - 'a' + 'A';
|
||
}
|
||
if( (c >= 'A') && (c <= 'Z' ))
|
||
{
|
||
HIDKey[2] = c - 'A' + 4;
|
||
}
|
||
else
|
||
{
|
||
if( c >= '1' && c <= '9' ) HIDKey[2] = c - '1' + 0X1E;
|
||
else
|
||
{
|
||
switch ( c )
|
||
{
|
||
case '`' :
|
||
HIDKey[0] = 0X08;
|
||
HIDKey[2] = 0X15;
|
||
break;
|
||
case '\\':
|
||
HIDKey[2] = 0x31;
|
||
break;
|
||
case ' ':
|
||
HIDKey[2] = L_SHIFT;
|
||
break;
|
||
case '\r':
|
||
HIDKey[2] = ENTER;
|
||
break;
|
||
case ':':
|
||
HIDKey[0] = 0x02;
|
||
HIDKey[2] = 0x33;
|
||
break;
|
||
case '+':
|
||
HIDKey[0] = 0x000;
|
||
HIDKey[2] = 0x57;
|
||
break;
|
||
case '_':
|
||
HIDKey[0] = 0X02;
|
||
HIDKey[2] = 0X2D;
|
||
break;
|
||
case '/':
|
||
HIDKey[0] = L_CTL + L_ALT;
|
||
HIDKey[2] = 0X16;
|
||
break;
|
||
case '0':
|
||
HIDKey[2] = 0X27;
|
||
break;
|
||
case '.':
|
||
HIDKey[2] = 0X37;
|
||
break;
|
||
case '~':
|
||
HIDKey[0] = L_ALT;
|
||
HIDKey[2] = 0X05;
|
||
break;
|
||
case '!':
|
||
HIDKey[0] = L_ALT;
|
||
HIDKey[2] = 0X08;
|
||
break;
|
||
default:
|
||
break;
|
||
}
|
||
}
|
||
}
|
||
delayms( 20 ); //emulate the press down and pop up
|
||
while(FLAG == 0); // Upload the key
|
||
Enp1IntIn();
|
||
while(FLAG == 0);
|
||
delayms( 20 );
|
||
HIDKey[0] = 0X00;
|
||
HIDKey[2] = 0X00; // Reset the key
|
||
while(FLAG == 0);
|
||
Enp1IntIn();
|
||
while(FLAG == 0);
|
||
}
|
||
|
||
|
||
/*******************************************************************************
|
||
* Function Name : extern HIDValueHandle( void )
|
||
* Description : Upload the HID code
|
||
* Input : None
|
||
* Output : None
|
||
* Return : None
|
||
*******************************************************************************/
|
||
|
||
void TSTKey(void)
|
||
{
|
||
// UINT16 KeyData;
|
||
// if(TKEY_CTRL&bTKC_IF)
|
||
// {
|
||
// KeyData = TKEY_DAT;
|
||
// if (KeyData < (TouchKeyButton-100)) //100 灵敏度调节
|
||
// {
|
||
// TXflag =SENDK;
|
||
// }
|
||
// mDelaymS( 200 );
|
||
// }
|
||
}
|
||
|
||
/*******************************************************************************
|
||
* Function Name : TXflagHandle(UINT8 val)
|
||
* Description :
|
||
* Input : None
|
||
* Output : None
|
||
* Return : None
|
||
*******************************************************************************/
|
||
|
||
char code sPath[] = "` E:\\vck1\\hid_recv.exe \r "; // The path for the software. SPACE for delay
|
||
char *pStr = sPath;
|
||
|
||
|
||
void TXflagHandle(UINT8 val)
|
||
{
|
||
UINT8 i;
|
||
char btn[4];
|
||
//TSTKey();
|
||
if(TXflag & 0X01) //测试激活指令，不启用
|
||
{
|
||
SendKey(pStr); // Upload path
|
||
pStr++;
|
||
if(*pStr == '\0')
|
||
{
|
||
SendKey( "~" ); // Upload ALT+B
|
||
delayms( 200 );
|
||
TXflag = 0;
|
||
}
|
||
}
|
||
else if(TXflag & SENDK) //键盘按键发送
|
||
{
|
||
btn[0]= val;
|
||
SendKey(btn);
|
||
TXflag &= ~SENDK;
|
||
}
|
||
else if(TXflag & SENDD) //数据通道发送
|
||
{
|
||
if(val>0)
|
||
{
|
||
Enp2TX(val);
|
||
TXflag &= ~SENDD;
|
||
}
|
||
}
|
||
else if(TXflag & 0x08) //键盘发送数字，暂时无应用
|
||
{
|
||
btn[3]= '\r';
|
||
btn[2]= (val%10)+ 0x30;
|
||
i = (val/10);
|
||
btn[1]= (i%10)+ 0x30;
|
||
btn[0]= (i/10)+ 0x30;
|
||
|
||
for(i=0;i<4;i++)
|
||
{
|
||
SendKey(btn+i);
|
||
}
|
||
memset(btn,0,4);
|
||
TXflag = 0;
|
||
}
|
||
}
|
||
|
||
/**************************** END *************************************/
|